FRP GRATING INSTALLATION

Here are the Gloryear FRP grating installation instructions in different application:

Platform installation

1. The supporting edge of the grid MUST has at least 40mm wide support on the steel beam, the installation gap between the grid and the grid is 6mm, and the installation gap between the grid and the concrete column is 10mm.

2. Gloryear M-type or L type clips should be used to fix the grid and the supporting steel beams. At least 4 clips are required for each square meters of grid. C type clips should be used to connect the edges of two adjacent non-supporting grids. Use at least 1 per 1.5m center Trench installation.

3. Refer to the grid size of the grid, and adjust the trench size as much as possible, so that the edge of the grid after cutting is a closed mouth to maintain the integrity of the cell and achieve a beautiful and elegant installation effect.

4. The grid has at least 40mm wide support on the concrete foundation, and the gaps between the grid and the concrete is 3-6mm.

Gloryear Stair installation

1. The grille step should be installed in the step frame. The frame can be an ordinary steel frame or a FRP frame.

2. The gap between the grid step and the frame is 3-6mm, each step is fixed with 8 fixing clips, and 2 are used for each corner.

3. The grid fixing clips provided by Gloryear are M-type, L-type and C-type. Different clips have different functions: M-type clamps are used for positioning connection between the grid and the supporting structure; L-type clamps are used for the special limit connection between the grille and the support structure; the C type is used for the overall connection between the edges of the two grilles.

Gloryear FRP grating Maintenance:

1. Dust and dirt on the surface can be cleaned with washing liquid during use, no other maintenance measures are required.

2. In the process of use, direct contact with various open flames and high temperatures such as electric welding and oxyacetylene flame during steel structure and equipment maintenance should be avoided.

3. In the process of use, the dragging, impact damage and paint pollution of various steel materials, steel sharps, tools, etc. should be avoided when repairing the steel structure and equipment.

If you have any questions, contact your Gloryear Sales manager.